Applications; Using The Internal Sequencer With An External Midi Keyboard - E-Mu XL-7 Command Station Owner's Manual

Applications

Using the Internal
Sequencer with an
External MIDI
Keyboard
   
If Channel Assign in the
song/pattern edit menu is set to
to external or both, you'll get
duplicate MIDI data if steps 2 &
3 in the setup are not set to Off.
These examples may help you with some common setups. When you have
a working setup, it's a good idea to save and name the Multisetup to
preserve your work.
In this setup, an external MIDI keyboard transmitting on a single MIDI
channel is used to record into the internal sequencer. This demonstrates the
new Rechannelize Input feature which frees you from changing the MIDI
channel of your controller keyboard.
Setup the Following Controls:
RECHANNELIZE INPUT (MIDI) - always
1.
KEYBOARD OUTPUTS MIDI (MIDI) - don't transmit
2.
KNOBS OUTPUT MIDI (MIDI) - don't transmit
3.
MERGE MIDI IN TO OUT (MIDI) - Out A: off, Out B: off
4.
LOCAL CONTROL (Controllers) - on
5.
Save and Name the Multisetup. (Global)
6.
Optional Steps:
TRIGGERS (Controllers) - Seq
7.
(If you want to record them into the sequencer.)
PROGRAMMABLE KNOBS (Controllers) - Seq
8.
(If you want to record them into the sequencer.)
Applications
XL-7, MP-7 or PX-7
XL-7 Owners Manual 133
Sequencer