Defroster Actuator Replacement - GMC Chevrolet Camaro 1998 Service Manual

)
HVAC
Installation Procedure
1. Install vent mode valve actuator and vacuum hose.
2. Install the vent mode valve linkage.
3. Install the module cover.
4. Install the module cover screws.
5.
Install the front floor air duct.
Notice:
Refer to Fastener Notice in Cautions and
Notices.
6.
Install the front floor air duct bolt.
Tighten
Tighten the front floor air duct bolt to
1.9 N-m (17 lb in).
7. Install the 1/P carrier. Refer to IP Carrier
Replacement in Instrument Panel, Gauges and
Console.
Defroster Actuator Replacement
Removal Procedure
1. Remove the 1/P carrier. Refer to IP Carrier
Replacement in Instrument Panel, Gauges
and Console.
2. Remove the front floor air duct bolt.
3. Remove the front floor air duct.
4. Remove the module cover screws.
5. Remove the module cover.
6. Remove the defroster valve actuator from the
linkage and vacuum hose.
Installation Procedure
1. Install the defroster valve actuator to the linkage
and vacuum hose.
2. Install the module cover.
3. Install the module cover screws.
4. Install the front floor air duct.
Notice:
Refer to Fastener Notice in Cautions and
Notices.
5.
Install the front floor air duct bolt.
Tighten
Tighten the front floor air duct bolt to
1.9 N·m {17 lb in).
6. Install the 1/P carrier. Refer to IP Carrier
Replacement.in Instrument Panel, Gauges and
Console.
HVAC System - Manual 1-107
365458
365458
365458