GMC Chevrolet Camaro 1998 Service Manual page 157

)
HVAC
Compressor Clutch Plate and Hub
Assembly Removal (V7 - Direct Mount)
Tools Required
• J 33013-8 Hub and Drive Plate Remover/Installer
• J 33027-A Clutch Hub Holding Tool
• J 41790 Compressor Holding Fixture
1. Remove the compressor from the vehicle.
2. Clamp the compressor holding fixture, J 41790 in
a vise. and attach the compressor to the J 41790.
3. Hold the clutch hub and drive plate assembly (2)
in place using the J 33027-A.
4. Remove the compressor shaft nut with a
13 mm socket (1 ).
5. Thread the J 33013-8 into the hub.
6. Remove the hub and drive plate assembly (1) by
turning the center screw into the body of the
J 33013-8 and against the compressor shaft.
7. Remove the shaft key and retain for reassembly.
HVAC System - Manual 1-47
157595
2
J
41790
157218
J
33013-8
157221