GMC Chevrolet Camaro 1998 Service Manual page 119

HVAC HVAC System - Manual 1-9
HVAC Components (cont'd)
Name Location Locator View Connector End View
Instrument panel to engine harness, under
Harness Routing Views
fnline Harness Connector
C230 (10 cavities) the right side of the instrument panel, End Views in Wiring
behind the knee bolster
in Wiring Systems
Systems
G112
Attached to the rear of the left Harness Routing Views
cylinder head in Wiring Systems
-
Near the left A-pillar, bolted to the
Harness Routing Views
G200 instrument panel mounting stud behind
in Wiring Systems
-
the kick panel
Near the right A-pillar, bolted to the
Harness Routing Views
G201 instrument panel mounting stud behind
in Wiring Systems
-
the kick panel
P100
Left side in th.e dash panel, engine to Harness Routing Views
-
the passenger compartment in Wiring Systems
P110
Right side in the dash panel, engine to Harness Routing Views
-
the passenger compartment in Wiring Systems
In the engine harness, main branch,
S108 (V6 VIN K) approximately 7 cm (3 in) from the vehicle
- -
speed sensor breakout
S108 (VB VIN G) In the engine harness, main branch,
(Automatic approximately 5 cm (2 in) from the
-
-
Transmission) automatic transmission breakout
S108 (VB VIN G)
In the engine harness, main branch,
(Manual Transmission)
approximately 12 cm (5 in) from the
-
-
vehicle speed sensor breakout
\
8114 (V6 VIN K)
Engine harness, approximately 3 cm (1 in)
- -
from generator breakout
)
Engine harness, approximately 17 cm
8114 (VB VIN G) (7 in) back from A/C compressor clutch
- -
connector
8115 (V6 VINK)
In the engine harness at the generator
-
-
breakout
In the engine harness, approximately
8115 (VB VIN G) 20 cm (8 in) back from the A/C -
-
compressor clutch connector
Engine harness, main branch, 8 cm (3 in)
8121 (V6 VINK) from powertrain control module (PCM)
- -
breakout
In the forward lamp harness,
S165
approximately 7 cm (3 in) from the
-
-
main branch into the UH electrical
center 2 breakout
In the instrument panel harness, main
S216 branch, approximately 10 cm (4 in) from
-
-
the instrument cluster breakout
In the instrument panel harness,
S248 approximately 2 cm (1 in) from the radio
-
-
connectors breakout
)