GMC Chevrolet Camaro 1998 Service Manual page 212

1-102 HV AC System_;~ Manual
1
2
3
282917
282918
282916
HVAC
Installation Procedure
1. Install the temperature control cable connector (5)
to the control. ·
2.
Connect the following electrical connectors to the (
HVAC control:
• Rear defogger (4)
• HVAC blower switch (3)
• HV AC control illumination (2)
• HVAC mode switch (1)
3. Connect the vacuum harness connector to the
vacuum selector valve.
4. Install the HVAC control.
Notice: Refer to Fastener Notice in Cautions and
Notices.
5.
Install the HVAC control bolts.
Tighten
Tighten the HVAC control bolts to
2.2 N-m (19 lb in).
6. Install the accessory trim plate.Refer to Bezel
Replacement - IP Cluster (Chevrolet) or Bezel
Replacement - IP Cluster (Pontiac) in Instrument
Panel, Gauges and Console.
(