GMC Chevrolet Camaro 1998 Service Manual page 162

1-52
HVAC System - Manual
157595
157224
J
8433-3
157234
Compressor C1utch Coil Removal
(V7 - Direct Mount)
Tools Required
• J
8433 Compressor Pulley Puller
• J 8433-3 Forcing Screw
• J 33023-A Puller Pilot
• J
33025
Clutch Coil Puller Legs
• J
41790 Compressor Holding Fixture
1. Remove the compressor from the vehicle.
HVAC
2. Clamp the compressor holding fixture, J
41790
in
a vise and attach the compressor to the J
41790.
3. Remove the compressor clutch plate and hub
assembly. Refer to Compressor Clutch Plate and
Hub Assembly Removal (V7 - Direct Mount).
4. Install the J 33023-A onto the front head of the
compressor.
5. Remove the compressor rotor and bearing
assembly. Refer to Clutch Rotor and/or Bearing
Removal (V7 - Direct Mount).
6. Mark the clutch coil terminal location (2) on the
compressor front head.
7. Install the J 33025 onto the J 8433.
8. Install the J 8433 onto the compressor clutch
coil (1) and tighten the puller leg bolts.
9. Tighten the center forcing screw J 8433-3
of the
compressor pulley puller J
8433
against the
J
33023-A
to remove the compressor clutch coil
from the compressor.
10. Remove the J 8433-3, the J 33023-A, the J 33025
and the J 8433.
(
(
(