GMC Chevrolet Camaro 1998 Service Manual page 175

)
HVAC
Compressor Clutch Coil Install
(VS - Conventional Mount)
Tools Required
• J 8433-1 Puller Bar
• J 8433-3 Forcing Screw
• J 33024 Clutch Coil Installer
• J 34992 Compressor Holding Fixture
1 . Place the clutch coil assembly on the front head
with the terminals positioned at the marked
location.
2.
Place the J 33024 over the internal opening of the
clutch coil housing.
3. Align the J 33024 with the compressor front head.
4. Center the J 8433-1 on the countersunk center
hole of the J 33024.
5. Install the through bolts and the washers of the
J 34992 through the slots in the J 8433-1.
6. Thread the through bolts into the J 33025 in order
to achieve full fixture thickness.
Important:
Ensure that the clutch coil and the J 33024
stay in-line during the installation.
7. Turn the J 8433-3 of the J 8433-1 in order to force
the clutch coil onto the head.
8. With the compressor still mounted to the J 34992
and the coil seated on the front head, stake the
front head using a drift punch with a diameter
of 3.175 mm (0.125 in).
HVAC System - Manual 1-65
J 8433-1
J 8433-3
237124
J 34992
237125