GMC Chevrolet Camaro 1998 Service Manual page 189

)
HVAC
8. Install the negative battery cable to the stud.
9. Install the negative battery cable nut to the engine
block stud.
Tighten
Tighten the negative battery cable nut to the
engine block stud to 25 N·m (18 lb ft).
10. Install a new 0-ring.
11. Install the A/C compressor and condenser hose
bolt at the accumulator.
Tighten
Tighten the A/C compressor and condenser hose
bolt at the accumulator to 16 N·m (12 1.b ft).
12. Recharge the A/C system. Refer to Refrigerant
Recovery and Recharging.
13. Perform a leak test on the A/0 system. Refer to
Leak Testing.
Compressor Hose Assembly
Replace'!'ent (5.7L)
Removal Procedure
1. Recover the refrigerant. Refer to Refrigerant
· Recovery and Recharging.
2. Remove the A/C compressor and condenser hose
from the clip on the fan- shroud.
3. Remove the A/C compressor
arid
condense·r hose
tiolt at the accumulator.
4. Discard the 0-ring.
5. Raise and suitably support the vehicle. Refer to
Lifting and Jacking the Vehicle in General
Information.
HVAC System - Manual 1-79
43679
282936
282941