GMC Chevrolet Camaro 1998 Service Manual page 158

1-48 HVAC System - Manual
)
/
237119
J33023-A
237120
237121
HVAC
Clutch Rotor and/or Bearing Removal
(VS - Conventional Mount)
Tools Required
• J 6083 Snap Ring Pliers
• J
9398
Bearing Remover
• J 8092 Driver Handle
• J
33020 Pulley Puller
• J 33023-A Puller Pilot
1. Remove the clutch plate and hub assembly. Refer
to Compressor Clutch Plate and Hub Assembly
Removal (VS - Conventional Mount).
2. Use the J 6083 in order to remove the rotor and
bearing assembly retaining ring.
3. Install the J 33023-Ato the front head.
4. Install the J 33020 into the inner circle of slots in
the rotor.
5. Turn the
J 33020 clockwise in the slots in order to
engage the tangs of the puller with the segments
between the slots in the rotor.
6. Hold the J 33020 in place. Tighten the puller
screw against the puller guide in order to
remove the puller rotor and bearing assembly.
(