Pulley Assy; Home Position Sensor - Konica Minolta bizhub 20 Service Manual

9.10.7 Pulley ASSY

(1) Remove the two B M3x6 Taptite screws, and then remove the Pulley ASSY.
(2) Remove the Pulley spring.
<Back side>

9.10.8 Home Position Sensor

(1) Release the Hooks and remove the Home position sensor.
(2) Disconnect the Connector from the Home position sensor.
(Home position sensor harness)
Home position sensor
Taptite B M3x6
Pulley spring
Connector
Hook
<Back side>
Pulley ASSY
1
2
Fig. 5-106
2
1
Fig. 5-107
5-90
Hook
Confidential