Adf Chute Assy - Konica Minolta bizhub 20 Service Manual

ADF Chute ASSY

9.8.8
(1) Disconnect the 7 connectors from the ADF relay PCB.
(2) Disconnect the connector of the ADF motor harness from the ADF motor.
(3) Remove the cup S M3x8 Taptite screw and ADF FG harness.
ADF motor
Taptite cup S M3x8
<Back side>
Document front sensor 2
(4) Turn the Document cover LGL upside down and remove the cup B M3x10 Taptite screw.
ADF FG harness
ADF relay PCB
Switch back solenoid ASSY
Switch back sensor
ADF relay PCB
ADF relay harness
Taptite, cup B M3x10
2
Document rear sensor
Document front sensor 1
PF solenoid ASSY
Fig. 5-42
Document cover LGL
Fig. 5-43
5-54
ADF motor harness
1
Confidential