Ring Group; Do Not Disturb (Dnd) - AT&T SB67118 User Manual

Getting started
Telephone base setup

Ring group

Use this feature to specify which extensions receive incoming calls. By
default, all extensions and the telephone base receive incoming calls. You
can block some extensions from receiving calls, however, they can still be
used to place outgoing calls.
1. When the telephone is idle, press MENU
2. Press or
ENTER.
MENU/
3. Press or
REP or SKIP to select the desired line (L1, L2,
4. Press
L3, L4) while Ring group flashes.
5. Press or
flashes, press the extension number on the dial pad
( * ,1,2,3,4,5,6,7,8,9,0) that you want to delete from the
ring group, or press the number again to add it up to the
group.
6. Press ENTER to save the setting and return to
MENU/
the previous menu. There is a confirmation tone. To exit
without making changes, press EXIT.
NOTE: The symbol

Do not disturb (DND)

Use this feature to silence your telephone base. When you activate the
do not disturb function, you will not hear paging tones, voice paging, or
incoming call rings.
Instead, the LINE 1-LINE 4 indicator flashes to signal an incoming call. If you
receive an intercom call, the extension number of that intercom call appears
on the screen display.
Press DND twice to prevent interruptions. The DND
1.
indicator turns on.
Press DND again to resume normal call alerts. The DND
2.
indicator turns off.
to scroll to Ringer setting. Press
to scroll to Ring group. Press
, then, while Extension number:
*
represents the telephone base; 0 represents extension 10.
.
/ENTER
ENTER.
MENU/
18
Directory
Call log
Ringer setting
>
Mailbox setup
Ringer volume
Ringer tone
Ring group
>
Ring group: L3
Extension number:
*1234567890
<>
Ring group: L3
Extension number:
*1-3-56-8-0
ENTER =Save
DND