Add And Register A Cordless Headset; To Register A Cordless Headset To Your Telephone Base - AT&T SB67118 User Manual

At&t dect 6.0 4-line corded/cordless small business system user's manual
Hide thumbs Also See for SB67118:
Table of Contents

Advertisement

Getting started

Add and register a cordless headset

You can use this phone hands-free when you register
a DECT 6.0 cordless headset (AT&T model TL7600, sold
separately) to the telephone base. The cordless headset
must have a charged battery. Make sure the headset
battery is properly installed.
Place the headset in the headset charger and note the
color of the ON/OFF button. If the button flashes a blue
and orange light twice every five seconds, the headset is
unregistered. If the button shows a constant blue light, the
headset is registered. You need to deregister the headset
before you can register it to the SB67118. See the deregistration instructions
in the user's manual of the telephone to which it is currently registered. See
page 76 for instructions on using the cordless headset with this telephone.

To register a cordless headset to your telephone base

1.
Place the headset in the headset charger and allow it to charge for at
least five minutes before beginning registration. Make sure the headset is
out of the headset charger before you begin registration.
2.
On the telephone base, press MENU
3.
Scroll down to Registration and press
4.
Scroll down to Cordless headset and press
The telephone base screen shows Cordless headset
registering. It takes up to 60 seconds to complete
the registration.
5.
Place headset into the cradle. The telephone base screen
shows Cordless headset registered and beeps when the
registration is successful.
Press the headset ON
6.
and the extension
display, the registration was successful.
If there is no dial tone, or the ON/OFF light on the headset
flashes twice every five seconds, the registration was not
successful. Remove the headset from the headset charger and
repeat the registration process again, starting with step
two above.
button. If you hear a dial tone
/OFF
icon appears on the telephone base
0
/ENTER.
ENTER.
MENU/
ENTER.
MENU/
11
COVM
Speed dial setup
Customer support
Registration
>
Register HS
Cordless headset
>
Deregistration
Cordless headset
registering
Cordless headset
registered
0
Line1
00:00:05
ON/OFF
button

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents