Hold Reminder; Set Date And Time - AT&T SB67118 User Manual

Getting started
Telephone base setup

Hold reminder

Use this feature to have silence or play a beep tone every 30 seconds when
there is a call on hold.
1. When the telephone is idle, press MENU
2. Press or
3. Press or
4. Press or
5. Press ENTER to save the setting and return to
MENU/
the previous menu. There is a confirmation tone. To exit
without making changes, press EXIT.

Set date and time

The answering system displays the date and time of the message while
playing messages. Before using the answering system, set the date and time
as follows. If you subscribe to caller ID service, the day, month and time are
set automatically with each incoming call. The year must be set so that the
day of the week can be calculated from the caller ID information.
Follow the steps below to set the month, day, year and time:
1. When the telephone is idle, press MENU
2. Press or
3. Press or
4. Using the dial pad to enter the date. Press
SKIP to scroll to the item you want to edit, and press
the dial pad keys to enter the correct digit.
5. Press to move to the time editing.
6. Press or
7. Press REP or SKIP to scroll to the item you want to
edit, and press the dial pad to enter the correct digit.
8. Press ENTER to save the setting and return to
MENU/
the previous menu. There is a confirmation tone. To exit without making
changes, press EXIT.
to scroll to Base setup. Press
to scroll to Hold reminder. Press
to scroll to On or Off.
to scroll to Base setup. Press
to scroll to Date and time. Press
to select AM or PM.
.
/ENTER
MENU/
MENU/
.
/ENTER
MENU/
MENU/
REP or
22
Line selection
Set line mode
Area codes
ENTER.
Hold reminder
>
ENTER.
Hold reminder
:On
ENTER=Save
Flashing
ENTER.
Set line mode
Area codes
ENTER.
Hold reminder
Date and time
>
Date: 12.31. 2006
Time: 09:00
ENTER=Save
Date: 01.01. 2009
Time: 12:00
ENTER=Save
AM
^v=PM
PM
^v=AM