To Connect The Telephone Line Cords To The Telephone Base - AT&T SB67118 User Manual

Getting started
Telephone base installation

To connect the telephone line cords to the telephone base

If you subscribe to high-speed Internet service (digital subscriber line - DSL)
through your telephone lines, you must install a DSL filter between the
telephone line cord and the telephone wall jack. The filter prevents noise
and caller ID problems caused by DSL interference. Please contact your DSL
service provider for more information about DSL filters.
Install the telephone line cords as shown below:
Electrical outlet
not controlled
by a wall switch
Power adapter
Line 3 + Line 4
Option 1: To connect two 2-line wall jacks
Line 2 + Line 1
Telephone
line cords
L3/L4 L1/L2
L3/L4
7
If you have DSL
high-speed Internet
service, a DSL filter
(not included) is
required on each
DSL line.
L1/L2