Configurations - Toshiba e-STUDIO182 Service Manual

12.2 Configurations

Pressure roller unit Pressure roller
Exit sensor (S5)
Fuser roller unit Fuser roller
Heater lamp (LAMP1, LAMP2)
Thermistor (THM1, 2, 3)
Fuser thermostat (THMO1)
Separation finger
Exit roller
Exit motor (M7)
e-STUDIO182/212/242
FUSER / EXIT UNIT
Fuser / exit unit
PFA tube sponge roller (φ25)
Periodic replacement part
Fluoro-plastic coated roller (φ30)
Periodic replacement part
564W+564W
Non-contact type (170ºC)
Periodic replacement part
Stepping motor: option
© 2009 TOSHIBA TEC CORPORATION All rights reserved
12 - 2