(3)
Remove the ground wire.
(4)
Disconnect the connector.
(5)
Install the PFU connector cover.
(6)
Take off the rear cover.
P.2-21 "2.5.10 Rear cover"
(7)
Disconnect 1 connector (optional damp
heater). Release the harness from the
harness clamp.
© 2009 TOSHIBA TEC CORPORATION All rights reserved
Fig. 2-47
Fig. 2-48
Fig. 2-49
Fig. 2-50
2 - 31
e-STUDIO182/212/242
OUTLINE OF THE MACHINE
2