Automatic Duplexing Unit (Adu) (Option: Md-0103); General Description - Toshiba e-STUDIO182 Service Manual

Hide thumbs Also See for e-STUDIO182:
Table of Contents

Advertisement

13. AUTOMATIC DUPLEXING UNIT (ADU) (OPTION: MD-0103)

13.1 General Description

The Automatic Duplexing Unit (ADU) is a unit to reverse a sheet of paper at duplex copying.
A switchback method using the exit roller is adopted for the ADU of this equipment. Immediately after
the printing of one side (fusing process) is completed, the paper is switchbacked by the exit roller. The
paper being reversed is then transported to the registration roller for the printing of the other side.
The ADU mainly consists of the transport rollers and their drive section, the paper guides and the ADU
driving PC board (ADU).
Exit motor
ADU driving PC board
© 2009 TOSHIBA TEC CORPORATION All rights reserved
Exit roller
Paper guide
Fig. 13-1
13 - 1
ADU motor
Upper transport roller
ADU sensor
Lower transport roller
AUTOMATIC DUPLEXING UNIT (ADU) (OPTION: MD-0103)
e-STUDIO182/212/242
13

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

E-studio212E-studio242

Table of Contents