(6)
Take off the mixers-2 and -3.
(7)
Remove 2 bushings and 2 oil seals on the
rear side.
(Replacement of Oil seal:
Replacement of Oil Seal")
(8)
Remove the end section of the mixer-1.
(9)
Remove the bushing and oil seal.
(Replacement of Oil seal:
Replacement of Oil Seal")
(10) Take off the mixer-1.
© 2009 TOSHIBA TEC CORPORATION All rights reserved
P.11-20 "11.6.8
End section of mixer-1
P.11-20 "11.6.8
11 - 19
Mixer-3
Mixer-2
Fig. 11-32
Oil seal
Fig. 11-33
Bushing
Oil seal
Fig. 11-34
Mixer-1
Fig. 11-35
e-STUDIO182/212/242
DEVELOPMENT SYSTEM
Bushing
11