Drawer Pickup Clutch - Toshiba e-STUDIO182 Service Manual

(3) Remove 1 screw and take off the pickup
solenoid bracket.
Note:
Be sure not to drop the bushing.
(4) Remove 1 screw and take off the pickup
solenoid from the bracket.
9.5.15

Drawer pickup clutch

(1) Take off the main motor drive unit.
P.8-7 "8.5.3 Main motor drive unit"
(2) Take off the pickup solenoid bracket.
P.9-20 "9.5.14 Pickup solenoid (SOL1)"
(3) Remove 1 E-ring, and take off the drawer
pickup clutch.
© 2009 TOSHIBA TEC CORPORATION All rights reserved
Pickup solenoid bracket
Fig. 9-40
Fig. 9-41
Drawer pickup clutch
Fig. 9-42
9 - 21
Bushing
Screw
Pickup solenoid
E-ring
e-STUDIO182/212/242
PAPER FEEDING SYSTEM
9