(4)
Release 2 latches and take off the platen
sensor.
6.7.7
CIS unit (CIS)
(1)
Take off the original glass.
P.6-16 "6.7.1 Original glass"
(2)
Move the CIS unit to the right most position.
Notes:
•
Be sure to hold the CIS unit drive belt-1 to
move the CIS unit.
•
When the CIS unit is moved, be sure not
to touch the shaft as the silicon oil is
applied on it.
© 2009 TOSHIBA TEC CORPORATION All rights reserved
Platen sensor
Fig. 6-25
Fig. 6-26
Fig. 6-27
6 - 21
CIS unit
CIS unit drive belt-1
e-STUDIO182/212/242
SCANNER
6