Description Of Abnormality - Toshiba e-STUDIO182 Service Manual

4.3.2

Description of abnormality

(A) Add paper
[In cases of the equipment drawer or the PFU / PFP drawer ] (When drawer is not installed)
• Drawer empty sensor detects the presence or absence of paper.
No drawer detected
"Add paper" is displayed
The LED on the control panel corresponding to the drawer blinks (When the drawer is selected)
[START] button disabled
[In cases of the equipment drawer or the PFU drawer] (When the drawer is installed)
Drawer detected
Paper empty sensor OFF
"Add paper" is displayed
The LED on the control panel corresponding to the drawer blinks (When the drawer is selected)
[START] button disabled
[In case of the PFP drawer] (When the drawer is installed)
• When the power is turned ON or the drawer is installed
PFP starts initialization
The detection of paper existence starts
Tray-up motor ON – Tray is raised
At this time, the tray-up sensor and paper empty sensor are OFF
When the tray-up sensor is not turned ON in a fixed period of time
Tray abnormality
Cleared by turning the power ON and then OFF
The tray-up sensor is turned ON in a fixed period of time
- The tray-up motor is stopped.
At this time, if the paper empty sensor is
e-STUDIO182/212/242
GENERAL OPERATION
"Add paper" is displayed regardless of the existence of paper
4 - 6
ON: It is judged that there is paper
OFF: It is judged that there is no paper
The lamp on the control panel
corresponding to the drawer blinks
(When the drawer is selected)
© 2009 TOSHIBA TEC CORPORATION All rights reserved