Toshiba e-STUDIO182 Service Manual page 59

(12) Remove 1 screw and take off 1 fixing bracket
on the rear right side.
(13) Lift up the equipment and take off the PFU.
[G-2] When PFP is installed
(1) Take off the rear cover.
P.2-21 "2.5.10 Rear cover"
(2) Remove 1 ground wire and 2 connectors.
© 2009 TOSHIBA TEC CORPORATION All rights reserved
Fig. 2-55
Fig. 2-56
Fig. 2-57
2 - 33
e-STUDIO182/212/242
OUTLINE OF THE MACHINE
2