Receiving Faxes - Canon Fax-L260i User Manual

Problem
The FAX-L260i cannot send
a fax using ECM?
(continued)
Errors occur frequently
while sending faxes?

Receiving Faxes

Problem
The FAX-L260i cannot
receive faxes automatically?
9-22 Frequently Asked Questions
Possible cause
ECM receiving on the
receiving fax machine may
not be turned on.
The phone line of the other
party's G3 fax may be in
poor condition, or may have
a poor connection.
Possible cause
The FAX-L260i may have a
document in memory,
leaving very little or no
memory available.
An error may have occurred
during reception.
The sheet feeder may be
empty.
The ISDN line may not be
connected properly.
Solution
If the receiving fax does support
ECM reception, call the other
party and have them check if
ECM reception is turned on.
Lower the speed at which the
unit starts sending faxes in the
TX START SPEED menu
setting. See page 11-15.
Solution
Print out any documents stored
in memory. See page 6-3.
Check the LCD display for an
error message. See page 9-31 for
a listing of the FAX-L260i's
error messages.
Print an activity report and look
for an error code.
Make sure the sheet feeder has
paper in it.
Make sure the ISDN line
connection is secure.
Chapter 9