Table of Contents
Advertisement
Message
DOC TOO LONG
DOCUMENT READY
ECM RX
ECM TX
LOAD PAPER
MEMORY FULL
Chapter 9
Error Code
Cause
#003
It took more than 32
minutes to send or copy a
document.
It took more than 32
minutes to receive a
document.
The document is longer
than 1 metre.
–
The document in the
Automatic Document
Feeder (ADF) is ready for
scanning.
–
The FAX-L260i is
receiving a fax using ECM.
–
The FAX-L260i is sending
a fax using ECM.
–
The FAX-L260i is out of
recording paper.
#037
The FAX-L260i's memory
is full because it has
received too many
documents, or a very long
or detailed document.
The memory is full
because you sent too many
pages at once, or a very
long or detailed document.
Action
Divide the document and send
or copy each part separately.
Contact the sender, and have
them divide the document and
send each part separately.
Use a copier to divide the
document into smaller sections
and send the copy.
Send the fax, scan the
document, or make a copy.
Faxes can take longer to
receive when using ECM. Try
turning ECM off if you need to
receive quickly.
Faxes can take longer to send
when using ECM. Try turning
ECM off if you need to send
quickly.
Load paper in the sheet feeder.
Any documents received in
memory will then be printed
automatically.
Print out any documents that
are stored in memory. Then
start the operation again. See
page 6-3.
Divide the document and send
each part separately. If the
memory contains any faxes,
you do not need to delete
them.
Frequently Asked Questions
9-33
Advertisement
Table of Contents
