Table of Contents
Advertisement
USER SETTINGS
Name
DATE & TIME
ENTER ISDN NO.
UNIT TELEPHONE #
UNIT NAME
TX TERMINAL ID
TTI POSITION
SCAN CONTRAST
VOLUME CONTROL
KEYPAD VOLUME
ALARM VOLUME
LINE MONITOR VOL
(Default settings are shown in bold type)
Chapter 11
Description
Set the date using the numeric buttons. Set
the time (24-hour clock) using the numeric
buttons.
Enter your ISDN number using the numeric
buttons. (Up to 20 digits.)
Enter your fax number using the numeric
buttons. (Up to 20 digits.)
This is the name that appears at the top of
each fax page you send (up to 24 characters).
See page 3-10.
This option sets the parameters for the
identification header that appears on every
page you send. (TTI)
Select the position of the TTI.
OUTSIDE IMAGE: Position the TTI outside
the image area.
INSIDE IMAGE: Position the TTI inside the
image area.
Set the density of the reproduction. Set to
DARKER for light originals and LIGHTER for
dark originals.
Set the audio level of the calling signal alarm
and buttons on the operation panel.
Set the volume of keypad touch beep.
Set the volume of the error alarm sound.
Set the volume of the line monitor (sound
during dialling).
Settings
–
–
–
–
ON/OFF
OUTSIDE IMAGE/
INSIDE IMAGE
DARKER/STANDARD/
LIGHTER
–
OFF/VOL MIN/VOL
MID/VOL MAX
OFF/VOL MIN/VOL
MID/VOL MAX
OFF/VOL MIN/VOL
MID/VOL MAX
The Menu System
11-5
Advertisement
Table of Contents
