Table of Contents
Advertisement
Resending a Document that Encountered an Error
If you get an error signal when sending a document from memory, you can try
resending the document to the same destination without having to scan it again.
Make sure that the ERASE FAILED TX setting in the TX SETTINGS is set to
OFF. See page 11-8 for details on changing the setting.
When the AUTO REDIAL setting in the TX SETTINGS is set to OFF, a
document that failed to be sent is also considered an error document.
1. Press FUNCTION, then MEMORY REF.
2. Use
3. Press START/COPY.
4. Use
5-38
Sending Faxes
or
to select MEM. RETRANSMIT.
or
to select the TX/RX number of the document you want to resend.
If you are not sure of the TX/RX number of the document you want to
resend, print the list of documents stored in memory. See page 5-35 for
details.
FUNCTION
MEMORY REFERENCE
DELETE DOCUMENT
MEM. RETRANSMIT
TX/RX NO.
0001
TX/RX NO.
0003
Chapter 5
Advertisement
Table of Contents
