9. Press START/COPY.
10. To enter additional groups, repeat steps 5 to 9.
-or-
If you have finished registering groups press STOP to return to standby mode.
Using Group Dialling
To send a document to a group of numbers, follow these instructions.
Be sure to adjust the document feed lever before loading your document. See page
5-6 for more details.
1. Prepare the document and load it, face down, into the Automatic Document
Feeder (ADF).
2. Enter the group(s) stored under a one-touch speed dialling button(s) and/or
coded speed dialling code(s).
Ex:
Ex:
4-30
Speed Dialling
If necessary, you can adjust the resolution and contrast. See page 5-13 for
more details.
The name registered under that one-touch speed dialling button or coded
speed dialling code is displayed. If no name is registered, GROUP DIAL will
be displayed.
If you make a mistake when selecting a group, press the STOP button and
start again.
08/10 1998 16:21
TEL=Canon GROUP2
TEL=Canon GROUP1
Chapter 4