Problems Feeding Paper Into The Fax-L260I Sheet Feeder - Canon Fax-L260i User Manual

Problems Feeding Paper Into the FAX-L260i Sheet
Feeder
If you are having problems feeding paper into the FAX-L260i's sheet feeder, check
the following table.
Whenever you correct one of these problems, be sure to remove the paper from the
sheet feeder and load it again. See page 2-32.
The following problems can also cause the paper to jam in the unit. See page 9-5 for
instructions on clearing paper jams.
Problem
Paper does not feed into the
FAX-L260i?
Printing is skewed ?
9-18 Frequently Asked Questions
Possible cause
The sheet feeder may
contain too many sheets.
Paper may not be inserted in
the sheet feeder correctly.
Paper may not be stacked
correctly in the sheet feeder.
Solution
Make sure the sheet feeder is
not filled past the limit. See
page 2-32.
Make sure paper is inserted all
the way into the sheet feeder.
See page 2-32.
Make sure the stack of paper is
straight in the sheet feeder.
Make sure there are no gaps
between the stack of paper and
the paper guides. See page 2-32.
Make sure the paper exit path is
clear.
Chapter 9