Table of Contents
Advertisement
Problem
The print quality is poor?
Also see "Printing Problems" on page 9-27.
The FAX-L260i cannot
receive faxes using ECM?
(ECM RX does not appear
in the LCD display when
receiving)
Nothing prints ?
9-24
Frequently Asked Questions
Possible cause
You may not be using the
correct paper.
The sending fax machine
may not be operating
properly.
The sending fax machine
may not support ECM.
ECM reception may not be
turned on.
The toner cartridge may not
have been installed properly.
The toner cartridge may
need to be replaced.
Solution
Make sure the paper in the
sheet feeder meets the
specifications given in
Appendix, "Specifications".
Make a copy with your FAX-
L260i. If the copy looks alright,
then your FAX-L260i is
operating properly. Contact the
sender and have them check
their fax machine.
If the sending fax does not
support ECM, then the FAX-
L260i receives the fax in normal
mode without error checking.
Make sure the FAX-L260i has
its ECM RX setting turned on.
Make sure the toner cartridge is
installed correctly. See page 2-
26.
See page 2-26.
Chapter 9
Advertisement
Table of Contents
