Table of Contents
Advertisement
9. To change the name, use the numeric buttons to enter the new name over the
previous name.
Ex:
10. Press START/COPY.
11. Press START/COPY again.
If you do not need to set the sending mode, use
to step 20.
12. Use
13. Press START/COPY, then use
If you select G4/G3 or G3, go directly to step 14b.
4-22
Speed Dialling
For details on entering letters, see page 3-3.
You can enter up to 16 characters for the name.
If you want to keep the same name, do not enter a new name and go to step
10.
to select ON then press START/COPY.
The default setting is G4/G3.
Canon TOKYO
OPTIONAL SETTING
to select OFF, and go directly
TX MODE
or
to select G4/G3, G4 or G3.
:A
ON
G4
Chapter 4
Advertisement
Table of Contents
