Figure 11-21 Paddle Shaft - Xerox Phaser 7700 Service Manual

RRP 79 Paddle Shaft

Figure 11-21 Paddle Shaft

Removal
1. Remove the Rear, Left and Right Covers (RRP 72, on page 308).
2. Remove the Cam Bracket Assembly (RRP 81, on page 319).
3. Remove the Staple Unit (RRP 82, on page 320).
4. Remove the e-clips from both ends of the shaft.
5. Remove the gear and bushing from the front end of the shaft.
6. Remove the bushing from the front and slide out the shaft.
7. Remove the Bushings and KL-Clips from both ends.
8. Slide the shaft to the rear and slide out.
Service Quick Reference Guide - Finisher
11-317