Xerox Phaser 7700 Service Manual page 155

Restore Factory Settings (margins)
You can reset margin settings to the factory-default values.
Caution
Use caution when resetting your margins to the factory-default
settings. Changing these settings back to factory defaults may not
be the last-saved settings if you have previously calibrated your
margins.
1.
From the Main Menu, highlight Support and press OK.
2.
Highlight Improve print-quality and press OK.
3.
Highlight Calibrate Colors Menu and press OK.
4.
Highlight Restore Factory Settings and press OK.
5.
Highlight Restore Factory Settings and press OK to reset the margin settings.
Reset Calibrations (color, margins, paper)
Note Resetting calibrations resets the color, margin, and paper settings.
1. From the Main Menu, highlight Support and press OK.
2. Highlight Improve print-quality and press OK.
3. Highlight Reset Calibrations and press OK.
4. Highlight Reset Calibrations NOW and press OK to reset the color, margins
and paper (transfer) settings to factory defaults.
Resetting All Printer Default Settings (NVRAM)
Resetting the NVRAM resets all printer values including network, printer setup,
job defaults, color, margin, and paper calibrations.
1.
From the Main Menu, highlight Support and press OK.
2.
Highlight Service Tools Menu and press OK.
3.
Reset NVRAM is displayed, press OK.
4.
Highlight Reset NVRAM and Reset Printer NOW and press OK to reset all
the settings to default.
6-132 Phaser 7700 Color Laser Printer