Xerox Phaser 7700 Service Manual page 156

Resetting engine NVRAM
Resetting (restoring) the engine NVRAM values resets the RegiCon color, margin
and A4/B5 selection paper settings to default. This is NOT the diagnostics reset.
To restore data stored on the hard drive to NVRAM, see "Clear Tech Rep Faults"
on page 6-135.
1. From the Main Menu, highlight Support and press OK.
2.
Highlight Service Tools Menu and press OK.
3. Reset NVRAM is displayed.
4. Highlight Reset Engine NVRAM NOW and press OK.
Resetting job defaults
Resetting the job defaults resets the paper source, paper destination, job offset,
stapling options, print-quality mode, 2-sided printing, image smoothing and
tekcolor corrections to their default values.
1. From the Main Menu, highlight Print Setup Menu and press OK.
2. Highlight Job Defaults Menu and press OK.
3. Reset Job Defaults is displayed, press OK.
4.
Highlight Reset Job Defaults NOW and press OK to reset the job defaults.
Service Quick Reference Guide
- Resetting NVRAM 6-133