Rear Cover Assembly; Figure 7-1 Rear Cover Assembly - Xerox Phaser 7700 Service Manual
Hide thumbs
Also See for Phaser 7700:
- User manual (108 pages) ,
- Advanced features and troubleshooting manual (69 pages) ,
- Install manual (42 pages)
Table of Contents
Advertisement
RRP 1 Rear Cover Assembly
Figure 7-1 Rear Cover Assembly
Removal
Warning
Turn off the printer and disconnect the power cord.
1.
If an Auxiliary Feeder has been installed, open the Auxiliary Feeder
Connection Cover and disconnect the Auxiliary Feeder wiring harness.
2.
Remove the four screws that secure the Rear Cover Assembly to the printer.
3.
Pull the top edge of the Rear Cover Assembly about one inch away from the
printer, and push down to release the cover.
7-140
Phaser 7700 Color Laser Printer
Advertisement
Chapters
Table of Contents
Troubleshooting
