Sharp MX-2301N Operation Manual page 753

Direct Address / Individual
No.001
Fax No.
Enter the Fax No. via the 10-Key pad, then press [OK].
0123456789
• Entering a pause between digits of the number...
Touch the [Pause] key at the place where you wish to enter a pause. The entered pause appears as a hyphen "-".
• To enter an F-code (sub-address and passcode)...
10 (1) Enter the destination fax number with the numeric keys.
(2) Touch the [Sub Address] key.
"/" appears.
(3) Enter the sub address with the numeric keys (maximum of 20 digits).
(4) Touch the [Sub Address] key.
"/" appears.
(5) Enter the passcode with the numeric keys (maximum of 20 digits).
A passcode is not necessary if the destination machine does not use a passcode.
• The destination fax number can be a maximum of 64 digits including all numbers and characters. However, only the
first 32 digits will appear in the display.
• When (2) is performed, the number entered to that point is stored and "Registration is completed." will appear.
If an incorrect entry is made...
Press the [CLEAR] key (
Direct Address / Individual
E-mail
Search Number
11
Key Name AAA AAA
Initial A
0123456789
Fax No.
Direct Address / Individual
E-mail
Search Number
Key Name
AAA AAA
12
Mode 33.6 kbps/None
Up to 18 characters can be entered for the key name.
Downloaded From ManualsPrinter.com Manuals
Next
Cancel
Pause
Sub Address
(1)
) and enter the correct digits.
Next
Internet Fax Direct SMTP
Registration is completed.
001
Index User1
Next
Internet Fax Direct SMTP
001 Registration is completed.
Enter the destination fax number.
Exit
(1) Enter the destination fax number with the
OK
numeric keys.
(2) Touch the [OK] key.
(2)
Touch the
Exit
through the screens.
Fax
2/2
Check the name of the key .
Exit
Fax
The name appearing next to the [Key Name] key will be
displayed in the one-touch key.
2/2
To change the key name, touch the [Key Name] key, edit the
name, and then touch the [OK] key.
7-139
SYSTEM SETTINGS
keys to switch
Contents