Sharp MX-2301N Operation Manual page 392

Fax
Special Modes
Program
Timer
3
Press the [BLACK & WHITE START] key.
Scanning begins.
When scanning finishes, place the next original and press the [BLACK & WHITE START] key. Repeat until all pages have
been scanned and then touch the [Read-End] key.
4
A beep will sound to indicate that scanning is finished.
To cancel scanning...
Press the [STOP] key (
• To erase shadows caused by the binding of a book or other bound document, use the erase function. (Note, however, that
"Centre Erase" and "Edge + Centre Erase" cannot be used.)
• When the scan size of the original is specified by numerical values, this function cannot be used.
To cancel Dual Page Scan...
Touch the [Dual Page Scan] key in the screen of step 3 so that it is not highlighted.
Downloaded From ManualsPrinter.com Manuals
OK
1/3
Dual Page
Erase
Scan
Card Shot
2in1
(3)
(4)
).
Select Dual Page Scan.
(1) Touch the [Job Detail Settings] key.
(2) Touch the [Special Modes] key.
☞
SPECIAL MODES
(3) Touch the [Dual Page Scan] key so that it is
highlighted.
(4) Touch the [OK] key.
4-67
FACSIMILE
(page 4-60)
Contents