Sharp MX-2301N Operation Manual page 138

Staple sort function
The staple sort function sorts output into sets, staples each set, and delivers the sets to the tray.
The relations between the stapling positions, paper orientation, permitted paper sizes for stapling, and number of sheets
that can be stapled are shown below.
For original placement orientations, see
2-37).
Stapling positions
1 staple at top left
corner
1 staple at bottom left
corner
2 staples at left edge
* Two sheets of paper up to 256 g/m
two less than the stated maximum.
• The number of sheets that can be stapled at once includes any covers and/or inserts that are inserted.
• When Mixed Size Original in the special modes is used with the "Same Width" setting, the maximum number of sheets that
can be stapled is 30 regardless of the paper size.
Downloaded From ManualsPrinter.com Manuals
"Original placement orientation (for the staple sort and punch
Staple sort
Vertically-oriented paper
Applicable paper sizes
A4, B5, 8-1/2" x 11", 16K
Number of sheets that can be
stapled:
Max. 50 sheets*
2
(68 lbs.) can be stapled as covers. When this is done, the number of sheets that can be used is
2-36
functions)" (page
Horizontally-oriented paper
Applicable paper sizes
A3, B4, A4R, 11" x 17", 8-1/2" x 14",
8-1/2" x 13-1/2", 8-1/2" x 13-2/5",
8-1/2" x 13", 8-1/2" x 11"R, 8K, 16KR
Number of sheets that can be
stapled
A3, B4, 11" x 17", 8-1/2" x 14",
8-1/2" x 13-1/2", 8-1/2" x 13-2/5",
8-1/2" x 13", 8K:
Max. 30 sheets*
A4R, 8-1/2" x 11"R, 16KR:
Max. 50 sheets*
Contents
COPIER