Sharp MX-2301N Operation Manual page 374

Specifying the send size of the original
Specify the send size as a paper size. If a send size bigger than the scan size is selected, the image will be enlarged. If
a send size smaller than the scan size is selected, the image will be reduced.
The send size cannot be specified when [Long Size] is selected for the scan size, or when the scan size is specified by
numerical values.
Display the original settings screen.
(1) Touch the [Job Detail Settings] key.
1
(2) Touch the [Original] key.
☞
JOB DETAIL SETTINGS
Fax
Scan Size
Original
2
2-Sided
Booklet
2-Sided
Tablet
Fax
Original
Auto
Manual
A4 A4
3
• Depending on the "Scan Size" setting, it may not be possible to select some sizes for the "Send Size". Size keys
that cannot be specified for the "Send Size" are greyed out to prevent selection.
• To specify an Inch size for the send size, touch the [AB
send size.
Fax
Scan Size
Original
2-Sided
Booklet
2-Sided
Tablet
4
The ratio used for reduction or enlargement of the original will appear between the "Scan Size" and the "Send Size".
Downloaded From ManualsPrinter.com Manuals
(page 4-44)
100% Send Size
Auto A4 Auto
Image Orientation
Inch
AB
A5 B5R B4
A5R A4 A3
B5 A4R
(1)
141%
Send Size
Auto A4 A3
Image Orientation
(1)
Touch the "Send Size" key.
OK
Specify the send size.
OK
(1) Touch the desired send size key.
216x340
216x343
(2) Touch the [OK] key.
(2)
Inch] key to highlight the [Inch] side and then specify the
Specify the orientation in which the
OK
original is placed.
(1) Touch the appropriate "Image Orientation"
key.
If the wrong orientation is selected here, the image may
(2)
not be sent properly when using enlargement/reduction.
(2) Touch the [OK] key.
4-49
FACSIMILE
Contents