Sharp MX-2301N Operation Manual page 517

Select the special modes.
(1) Touch the [Mode Switch] key and select the desired mode.
(2) Touch the [Job Detail Settings] key.
3
(3) Touch the [Special Modes] key.
(4) Touch the [Erase] key.
☞
SPECIAL MODES
Special Modes
Erase
Edge Edge+Centre
Erase
(1)
Special Modes
Erase
Centre
Side Erase
Erase
4
(1)
Downloaded From ManualsPrinter.com Manuals
(page 5-64)
Cancel
Edge
Erase
(0~20)
10
mm
(2)
Cancel
Centre
(0~20)
10
mm
(2)
Select the erase settings.
OK
OK (1) Touch the desired erase mode.
Select one of the 4 erase modes.
Touch the [Side Erase] key to open the following screen.
Side Erase
(3)
Left
OK
OK
Touch the checkbox of the edge that you wish to erase
and make sure that a checkmark (
When performing 2-sided scanning, set the erase edge on
the reverse side.
• If you touch the [Same Side as Side 1] key, the edge in
(3)
the same position as on the front side will be erased.
• If you touch the [Different Side from Side 1], the edge in
the position opposite to the erased edge on the front
side will be erased.
When you have completed the settings, touch the [OK] key.
(2) Set the erasure width with the
0 mm to 20 mm (0" to 1") can be entered.
You can also directly touch a numeric display key to
change the setting with the numeric keys.
(3) Touch the [OK] key.
5-69
SCANNER/INTERNET FAX
Cancel OK
Erase position
Up
for Original Side
Same Side as
Right
Side 1
Different Side
Down
from Side 1
) appears.
Contents
keys.