Sharp MX-2301N Operation Manual page 388

Place the original.
1
Place the original in the document feeder tray or on the document glass as appropriate for the functions stored in the
program.
Select the special modes.
(1) Touch the [Job Detail Settings] key.
2
(2) Touch the [Special Modes] key.
(3) Touch the [Program] key.
☞
SPECIAL MODES
Program
program A
3
program C
program E
program G
Program:program C
0312345678
Fax Scan
Mode Switch
Job Detail
Settings
Auto Reception
4
Fax Memory:100%
• The screen that appears will vary depending on the destination stored in the program.
• The mode cannot be changed here.
• Functions stored in the program cannot be cancelled here.
Press the [BLACK & WHITE START] key.
Scanning begins.
• If you inserted the original pages in the document feeder tray, all pages are scanned.
A beep will sound to indicate that scanning is finished.
• If you are scanning the original on the document glass, scan each page one page at a time.
5
When scanning finishes, place the next original and press the [BLACK & WHITE START] key. Repeat until all pages have
been scanned and then touch the [Read-End] key.
A beep will sound to indicate that scanning is finished.
To cancel scanning...
Press the [STOP] key (
Downloaded From ManualsPrinter.com Manuals
(page 4-60)
(1)
program B
program D
program F
program H
Send
Auto
A4
).
Retrieve the stored program.
(2)
(1) Touch the desired program key.
OK
1/6 (2) Touch the [OK] key.
Select additional settings.
When a program is used, the following settings can be
additionally specified:
• Job detail settings: Original scan size*, send size
Special Modes
• Special modes:
File
Quick File
* When stored in the program, this cannot be additionally
specified.
4-63
FACSIMILE
Timer Transmission, Card Shot, File,
Quick File, Own Name Select,
Transaction Report
Contents