Sharp MX-2301N Operation Manual page 742

Disabling of Auto Paper Selection
This setting is used to disable the Auto Paper
Selection function.
When this setting is enabled, automatic selection of
paper that is the same size as the original on the
document glass or in the automatic document feeder
does not take place.
To enable this setting, select the checkbox
touch the [OK] key.
Printer settings
Prohibit Notice Page Printing
This setting is used to disable printing of notice
pages.
To enable this setting, select the checkbox
touch the [OK] key.
Prohibit Test Page Printing
This setting is used to disable printing of test pages.
When this setting is enabled, "Printer Test Page" in
the system settings cannot be used to print test
pages.
To enable this setting, select the checkbox
touch the [OK] key.
Exclude Bypass-Tray from Auto Paper
Select
When paper selection is set to auto, this setting
excludes the bypass tray from the trays that can be
selected. It is recommended that you enable this
setting when special paper is frequently loaded in the
bypass tray.
To enable this setting, select the checkbox
touch the [OK] key.
Image Send Settings
Disable Switching of Display Order
This is used to prohibit changes to the order of display
(order search number, ascending, descending) in the
Address Book.
When this setting is enabled, touching a tab on the
Address Book screen does not change the order. The
currently selected display order will be the order that
is used after the setting is selected.
To enable this setting, select the checkbox
touch the [OK] key.
Downloaded From ManualsPrinter.com Manuals
Disable Scan Function
This is used to disable PC scan and USB memory
scan.
When these modes are disabled, they are greyed out
when the mode is selected in the base screen.
Select the checkboxes
wish to disable and touch the [OK] key.
and
Settings to Disable the Registration of
Destination
This is used to prohibit the storing of destinations.
Storing from the machine, storing from the Web page,
and storing from a computer can each be separately
prohibited.
Disable Registering Destination from Operation
Panel
Disables address control from the machine.
and
To use this setting, select the desired items
touch the [OK] key.
• Group (Direct Entry)
- E-mail
- Internet Fax (Including Direct SMTP)
- Fax
• Group (Address Book)
and
- E-mail
- FTP
- Desktop
- Network Folder
- Internet Fax (Including Direct SMTP)
- Fax
• Individual
- E-mail
- Internet Fax (Including Direct SMTP)
- Fax
and
(When the [Select/Cancel All] key is touched, all
settings become
checked condition, all settings become
and
7-128
SYSTEM SETTINGS
of the modes that you
. When the key is touched in the
.)
Contents
and