Sharp MX-2301N Operation Manual page 661

Settings
Item
Copies
Orientation
Default Paper Size
Default Output Tray*
Default Paper Type
Initial Resolution Setting
Disable Blank Page Print
3
Line Thickness*
2-Sided Print
Colour Mode
3
N-Up Print*
4
Fit To Page*
Output
Quick File
*1 When a right tray is installed.
*2 When a finisher is installed.
*3 This setting is used to adjust the line width of vector graphics (black and white printing only). Except for CAD and
other specialized uses, there is normally no need to change this setting. When "0" is selected, all lines are printed at a
width of 1 dot.
*4 Only effective when printing PDF, JPEG, and TIFF files.
Downloaded From ManualsPrinter.com Manuals
1 - 999 sets
• Portrait
• Landscape
A3, B4, A4, B5, A5, 11" x 17", 8-1/2" x 14",
8-1/2" x 13", 8-1/2" x 11", 7-1/4" x 10-1/2", 5-1/2" x 8-1/2", 8K, 16K
1
• Centre Tray
• Offset Tray*
• Right Tray
Plain Paper, Letter Head, Pre-Printed, Pre-Punched, Recycle Paper, Colour
• 600dpi
• 600dpi (High Quality)
•
•
0 - 9
• 1-Sided
• 2-Sided (Book)
• 2-Sided (Tablet)
• Auto
• B/W
• 1-Up
• 2-Up
• 4-Up
•
•
• Print per Unit
• Punch*
• Staple Position*
None, 1 Staple at Back, 2 Staples, 2 Staples (Top)
•
•
2
(Disabled)
(Enabled)
(Use Fit to Page)
(Do not use Fit to Page)
2
2
:
(Disabled)
(Enabled)
7-47
SYSTEM SETTINGS
Settings
Contents