Sharp MX-2301N Operation Manual page 428

To
AAA AAA
CCC CCC
EEE EEE
Freq.
ABCD
2
If a passcode has been omitted in the memory box of the other machine, (5) and (6) are not necessary.
Press the [BLACK & WHITE START] key.
3
Your machine will call the other machine and initiate reception of the fax.
• Polling multiple machines (serial polling) is not possible.
• F-code polling reception can be used in combination with a timer setting. Only one polling reception operation with a timer
setting can be stored at a time.
☞
SENDING A FAX AT A SPECIFIED TIME (Timer)
To cancel polling...
Touch the [Polling] key in the screen of step 1 so that it is not highlighted.
Downloaded From ManualsPrinter.com Manuals
(2)
Cc
1/1
BBB BBB Address Review
DDD DDD
Sub Address
FFF FFF
EFGHI JKLMN OPQRST UVWXYZ etc.
(3), (5)
Enter the destination fax number.
(1) Touch the [Address Book] key in the base
Condition
Settings
screen.
(2) Touch the one-touch key of the desired
Global
destination.
Sort Address
If the destination is not stored in the address book, enter
the fax number with the numeric keys.
If the sub-address and passcode are stored in the one-touch
key, the following sub-steps are not necessary. Go to step 3.
(3) Touch the [Sub Address] key.
"/" appears.
(4) Enter the sub-address with the numeric
keys.
(5) Touch the [Sub Address] key.
"/" appears.
(6) Enter the passcode with the numeric keys.
(page 4-68)
4-103
FACSIMILE
Contents