11A-4-6
Timing marks
Timing mark
Paper clip
Timing mark
Timing mark
E
Mitsubishi Motors Corporation
4G9 ENGINE (E - W) -
"FA TIMING BELT INSTALLATION
(1) Make sure that the auto-tensioner is installed properly.
(2) Align the timing mark on each sprocket with the
(3) Turn the crankshaft sprocket one half the tooth width
(4) Fit the timing belt to the intake camshaft sprocket and
(5) Use two wrenches to fit the timing belt to the exhaust
Nov. 1995
Timing Belt
(Refer to service point F.)
corresponding mark on the timing belt.
counterclockwise.
secure with a paper clip at the illustrated position.
sprocket while aligning the timing marks.
PWEE9502-A
Revised