Installing Oil Pump Gear; Installing Fuel Injection Pump; Inspecting And Adjusting Timing Gear After Installation; Inspecting Backlash And End Play - Mitsubishi S6S-Y3T61HF Service Manual

2.7 Installing oil pump gear

(1) Install the oil pump gear to the oil pump shaft.
(2) Tighten the jam nut to the specified torque.

2.8 Installing fuel injection pump

(1) Install the fuel pump gear with its match marks aligned
with the marks on the fuel injection pump and idler
gear.
(2) Tighten the fuel injection pump mounting bolts evenly.
2.9 Inspecting and adjusting timing gear after
installation
Be sure to inspect and adjust the timing gear when the
timing gear has been reassembled.
2.9.1

Inspecting backlash and end play

After installing the timing gears, be sure to inspect and
adjust the backlash and end play between gears.
REASSEMBLY OF BASIC ENGINE
Oil pump gear
33 ± 5 N·m
{3.4 ± 0.5 kgf·m}
[24.6 ± 3.6 lbf·ft]
Installing oil pump gear
Fuel injection pump
Installing fuel injection pump
Dial gauge
Measuring idler gear end play
Measuring timing gear backlash
Dial gauge
7-11