Mitsubishi 4G9 User Manual page 44

Tensioner
pulley
Crankshaft sprocket
E
Mitsubishi Motors Corporation
4G9 ENGINE (E - W) -
(6) Secure the timing belt with a paper clip at the illustrated
(7) Fit the belt to the idler pulley water pump sprocket,
Idler pulley
Water
pump
sprocket
(8) Raise the tensioner pulley in the direction of an arrow
(9) Remove the two paper clips.
(10)Make sure that all timing marks are in alignment.
(11)Give a 1/4 counterclockwise turn to the crankshaft. Then
May 1995
Timing Belt
position.
crankshaft sprocket and tensioner pulley in that order.
and tighten the tensioner pulley bolt.
turn the crankshaft clockwise to align the timing marks
again.
PWEE9502
11A-4-7