Oil Pan Removal; Outer Rotor/Inner Rotor Removal; Inner Rotor/Outer Rotor Installation; Sealant Application To Oil Pump Case - Mitsubishi 4G9 User Manual

4g9 series
Hide thumbs Also See for 4G9:
Table of Contents

Advertisement

11A-10-4
MD998727
3 mm diameter
bead sealant
E
Mitsubishi Motors Corporation
4G9 ENGINE (E - W) -
REMOVAL SERVICE POINTS
MD998727
AA" OIL PAN REMOVAL
(1) Knock in the special tool deeply between the oil pan
(2) Hitting the side of the special tool, slide the special tool
AB" REMOVAL OF UPPER OIL PAN
(1) At first remove the bolt (Length: 121 mm <DOHC,
AC" OUTER ROTOR/INNER ROTOR REMOVAL
(1) Make alignment dots on the outer and inner rotors for
Alignment dots
INSTALLATION SERVICE POINTS
"AA INNER ROTOR/OUTER ROTOR INSTALLATION
Alignment dots
(1) Apply engine oil to the rotors. Then, install the rotors
"BA SEALANT APPLICATION TO OIL PUMP CASE
Dec. 1998
Front Case and Oil Pump
and the cylinder block.
along the oil pan to remove the oil pan.
DOHC- GDI for CARISMA>, 116 mm <DOHC - GDI for
PAJERO io>) which is nearest to flywheel, and the remove
the other bolts.
Caution
Never use the special tool (oil pan remover), etc.
reference in reassembly.
ensuring that the alignment dots made at disassembly
are properly aligned.
Specified sealant:
Mitsubishi Genuine Part No. MD970389 or
equivalent
PWEE9502-E
Revised

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents