Exhaust Manifold Bracket Installation - Mitsubishi 4G9 User Manual

Bracket B
Shear-droop
Exhaust
manifold
Bracket
E
Mitsubishi Motors Corporation
4G9 ENGINE (E - W) -
INSTALLATION SERVICE POINTS
"AA EXHAUST MANIFOLD BRACKET INSTALLATION
(1) Slide the washers over the bolts with the chamfered side
(2) Install temporarily the exhaust manifold brackets A and
Bracket A
(3) Check that both brackets are in close contact with the
Exhaust
manifold
"BA EXHAUST MANIFOLD BRACKET INSTALLATION
(1) The washers must be installed with the shear-drooped
(2) Temporarily install the exhaust manifold bracket as shown
(3) Verify that the bracket is brought into close contact with
Dec. 1998
Exhaust Manifold (GDI)
toward the bolt.
B as shown in the illustration.
bosses, and then tighten fully the bracket mounting bolts.
side toward the bolts.
in the illustration.
the boss on the exhaust manifold, then tighten the bolts
to the specified torque.
PWEE9502-E
11A-6b-3
Added