Oil Filter Installation; Oil Pump Inspection - Mitsubishi 4G9 User Manual

11A-10-6
<Except for PAJERO io>
<For PAJERO io>
10
8
3
1
5
7
Oil passage
E
E
Mitsubishi Motors Corporation
Mitsubishi Motors Corporation
4G9 ENGINE (E–W) –
(4) Tighten the lower oil pan mounting bolts in the sequence
6
2
4
9
"EA OIL FILTER INSTALLATION
(1) Clean the filter installation surface of the cylinder block.
(2) Apply engine oil to the O-ring of the oil filter.
(3) Screw in the oil filter until its O-ring comes in contact
"FA SEALANT APPLICATION TO OIL PRESSURE
(1) Apply sealant to the threads of the switch.
INSPECTION
OIL PUMP
(1) Check the tip clearance.
May 1995
Jun. 2002
Front Case and Oil Pump
shown in the illustration.
with the base. Then tighten one more turn.
SWITCH
Specified sealant:
3M ATD Part No. 8660 or equivalent
Caution
Use care not to allow the sealant to plug the oil
passage.
Standard value: 0.06 – 0.18 mm
PWEE9502
PWEE9502-K
11300730026
Revised